Florentin Smarandache, W. B. Vasantha Kandasamy
In this chapter, we have used the fuzzy control method to find the correct measure of pressure and speed of kiln. Using data from Alathur cement industry, we have used mean of maximum method of fuzzy control with the data and we found the pressure and speed of kiln. Here the speed and pressure of kiln are important parameters in the kiln, because the SOx and N0X concentration is dependent on the kiln feed, coal feed and the kiln feed, coal feed are dependent on speed and pressure of kiln. That means if we increase the kiln feed and coal feed we must increase the kiln pressure and speed. By this way the mixing of SOx and NOx with kiln feed is maintained properly or otherwise the SOx and NOx will not mix fully with the kiln feed. The remaining unmixed gases of SOx and NOx are the wastage polluting the environment. For this, we convert all this kiln feed and coal feed level and pressure of kiln and speed of kiln into fuzzy control. By using fuzzy control we identify a correct pressure and speed of the kiln for a given kiln feed and coal feed. When we choose a correct pressure of kiln and speed of kiln through fuzzy control, the SOx and NOx are fully mixed in the kiln. By this we minimize the wastage of SOx and NOx polluting the environment.
Read this work at the World Public Library (library card needed).